Steam Boiler

Blended Treatments

Kem manufactures a variety of pre blended, single feed treatments for steam boilers. These products control oxygen pitting, corrosion, scale formation and sludge deposition. Depending upon the raw water make up, prevalent alkalinity conditions, and system operational parameters, these Kem boiler treatments provide fast, effective solutions to low pressure steam boiler plants.




SB 629

SB 629 is a single feed steam boiler treatment for use in moderate hardness make up water systems. It controls oxygen pitting, corrosion, scale formation and sludging.

Full tech data on this product

Product code: 5629


SB 649

SB 649 is a single feed steam boiler treatment for use in moderate hardness make up water systems. It controls oxygen pitting, corrosion, scale formation and sludging, as well as return line condensate corrosion.

Full tech data on this product

Product code: 5649


Electrotreet

Electrotreet is a pre blended, single feed boiler treatment that controls oxygen pitting, scale formation and sludge fluidization. It is designed specifically for electric boilers.

Full tech data on this product

Product code: 7002


RX-150

RX-150 is a single feed boiler water treatment designed for all types of low to high hardness make up waters. It controls oxygen pitting, corrosion, scale and sludge formation and return line condesate corrosion. RX-150 is designed for use in food processing plants where steam does not come into contact with the food being processed.

RX-150 is approved by Agriculture Canada for use in federally registered food processing establishments.

Full tech data on this product

Product code: 7007


KT 50

KT 50 is a single feed boiler water treatment designed for use in low hardness and low alkaline waters. It controls corrosion, oxygen pitting, scale formation and sludge deposition. KT 50 is used in food processing establishments where steam comes in contact with the food being processed.

KT 50 is approved by Agriculture Canada for use in federally registered food processing establishments.

Full tech data on this product

Product code: 7050


KT 100

KT 100 is a single feed boiler water treatment designed for use in moderate hardness and low to moderate alkaline waters. It controls corrosion, oxygen pitting, scale formation and sludge deposition. KT 100 is used in food processing establishments where steam comes in contact with the food being processed.

KT 100 is approved by Agriculture Canada for use in federally registered food processing establishments.

Full tech data on this product

Product code: 7100


KT 200

KT 200 is a single feed boiler water treatment designed for use in moderate to high hardness and moderate to high alkaline waters. It controls corrosion, oxygen pitting, scale formation and sludge deposition. KT 200 is used in food processing establishments where steam comes in contact with the food being processed.

KT 100 is approved by Agriculture Canada for use in federally registered food processing establishments.

Full tech data on this product

Product code: 7200


© Kem Canada Mfg
4 Blair Drive, Brampton, Ontario, Canada, L6T 2H5
tel: 905.456.9444    fax: 905.456.9447