Glycols
Glycols
A variety of glycol based, anti freeze compounds are available from Kem. These products
are formulated with varying degrees of glycol percentages and inhibitor packages. They are designed to
meet the requirements of freeze point protection during Canadian winters.
Glycol E-30 is a nitrite-borate inhibited ethylene glycol product. It is designed for
recirculating systems requiring 20-30% ethylene glycol concentraions and for coil storage where severe arctic condition
are not prevalent.
Full tech data on this product
Product code: 5813 Glycol E-60 is a pre-blended ethylene glycol, with nitrite-borate corrosion inhibitors.
It is designed for coil storage during winter months and for fully operational recirculating systems requiring 50 - 60%
ethylene glycol concentrations.
Full tech data on this product
Product code: 5814 Glycol E-100 M is an ethylene glycol product, inhibited with sodium molybdate as the primary
corrosion inhibitor. It is designed for systems where nitrite-borate is not desired and it provides a lower solids conents.
Full tech data on this product
Product code: 5823 Glycol E-100 is a full strength, nitrite-borate inhibited ethylene glycol. It is designed
for closed systems that require freeze point protection. Glycol E-100 is diluted on site to
produce the desired percentage of ethylene glycol required for the system.
Full tech data on this product
Product code: 5815 Glycol T-102 is a full strength, ininhibited ethylene glycol. It is designed
for closed systems that require freeze point protection. Glycol T-102 is diluted on site to
produce the desired percentage of ethylene glycol required for the system.
Full tech data on this product
Product code: 5102 Glycol P-50 is a propylene glycol product, inhibited with food grade corrosion inhibitors.
It is designed for systems that may come in contact with sanitary conditions. Glycol P-50 is designed to be used in coils and systems requiring 10-50 %
propylene glycol.
Full tech data on this product
Product code: 5817 Glycol P-100 is a propylene glycol product, inhibited with food grade corrosion inhibitors.
It is designed for systems that may come in contact with sanitary conditions. Glycol P-100 is designed to be diluted on site to meet the
specific requirents of the system.
Full tech data on this product
Product code: 5816 Glycol P-100N is a propylene glycol product, inhibited with sodium nitrite and an azole corrosion inhibitors.
It is designed for systems where sodium nitrite is the primary existing corrosion inhibitor. Glycol P-100N is designed to be diluted on site to meet the
specific requirents of the system.
Full tech data on this product
Product code: 5824 KT 290 is a propylene glycol product designed for systems that may come in contact with food processing or domestic water applications.
Full tech data on this product
Product code: 7290 Blue Trace is a non hazardous tracing dye that may be used to colour glycol or industrial water systems.
It is also used as a tracing compound to determine where system leakage may occur.
Full tech data on this product
Product code: 5xxx
Glycol E-30
Glycol E-60
Glycol E-100 M
Glycol E-100
Glycol T-102
Glycol P-50
Glycol P-50 is approved by Agriculture Canada for use in federally registered processing establishments.
Glycol P-100
Glycol P-100 is approved by Agriculture Canada for use in federally registered processing establishments.
Glycol P-100N
KT 290
KT 290 is approved by Agriculture Canada for use in federally registered processing establishments.
Blue Trace
Glycol P-50 is approved by Agriculture Canada for use in federally registered processing establishments.