High Performance Gear Oils
High Performance Gear Oils
| Trojan gear box lubricants provide a very wide selection of gear fluids designed for all kinds of gear boxes, speed reducers, in all types of operating conditions from extreme temperature applications to extreme shock loading pressure applications. They are designed as industrial specialty gear lubricants to be used where conventional gear lubricants fall short or fail. | ||
|
|
||
|
||
| TRL # 154 is a multi-grade
(85/140) enclosed gear oil. Polymer fortified,
TRl 154 replaces inventories of multiple single grade gear oils. Its resistance
to breakdown reduces oil changes.
SPECIAL BENEFITS:
| 
Typical Properties
of TRL 154 |
|
|
|
||
|
||
TRL #155 is a multi-grade
(80/90) enclosed gear oil. Similar to TRL #154 (above), this products provides
a narrower operating range for a multi-grade. TRL 155 meets U.S. MIL specification MIL-L-2105C, for
use in spur, hyphoid, spiral bevel, helical and planetary gears where extreme
pressure exists.
|
| Typical Properties
of TRL 155 |
|
|
|
||
|
||
TRL # 153 is a multi-grade (80/90) molybenum disulfide fortified, polymer
gear oil. It is similar to the TRL 155 (above) but contains moly disulfide
for extra anti-wear and load carring capabilities.
|
|
Typical Properties
of TRL 153 |
|
|
|
||
|
||
TRL # 159 is a multi-grade (85/140) molybdenum disulfide fortified, polymer
gear oil. It is similar to the TRL 154 (above) but contains moly disulfide
for additional anti-wear and load carying capabilities.
|
|
Typical Properties
of TRL 159 |
|
|
|
||
|
||
| Arctic gear oil #151 is a multi-grade (75/90) polymer fortified, low temperature,
extreme pressure gear oil, designed for use
in extreme low operating conditions. It is recommended for lubrication
of all types of enclosed gears including, spur, helical, planetary, rack
& pinion, bevel, spiral bevel, herringbone and worm gears.
|
Typical Properties
of TRL 151 |
|
|
|
||
|
||
| TRL series 217 through 224 are single grade, high performance molybdenum
disufide fortified, polymer gear oils, with ISO viscosities for 68 to 1500.
These are extreme pressure lubricants designed for industrial gear drives
under normal, medium and heavy duty or shock loaded conditions. Being moly
disulfide fortified on highly refined base oils, these gear oils show superior
resistance to oil breakdown, withstand high temperatures for longer periods
of time, minimize sludge and varnish build-ups while extending equipment
lifespans.
|
Typical Properties
of TRL 217-224 |
|
|
|
||
|
||
TRL series 238 through 244 are high performance (non moly) polymer
gear oils of single viscosity grades of ISO 68 to 1500. These are designed
for equipment where molybdenum disulfide is non tolerable. These gear oils
are similar in nature to the TRL 217 - 224 series but with extra polymer
and no molybdenum.
|
|
Typical Properties
of TRL 238 - 244 |
|
|
|
||
TRL # 154