Extreme Temperature Greases
Extreme Temperature Greases
| Trojan's extreme temperature greases are designed to equipment and machinery to operate at temperatures beyond the normal operating ranges of conventional lubricating greases. These greases are enhanced to provide extreme pressure characteristics while under extremes of temperatures. Although they may be used as multi-purpose lubricating greases, their performance is self demonstrating under adverse conditions. | |
|
|
|
|
|
| TRG # 90 No-Seize: is a NLGI1, E.P. anti-seize grease, providing
lubrication to temperatures
of 2000 F. The anti-seize package provides protection against galling,
pitting, seizing and corrosion under extreme conditions.
Trojan Chemicals TRG 90 No Seize is a specialized lubricant for the extremely high temperature and corrosive specialty applications. It is an extreme pressure, anti-seize, anti-galling, anti-galvanic, anti-corrosive, anti-wash out lubricating grease and sealant. TRG 90 is designed for temperatures up to 2100 F and conforms to mil specifications. TRG 90 is approved by Agriculture Canada for use in registered food processing establishments.
|
|
|
|
|
|
|
| This is a NLGI 2, E.P.
"non-melt" moly disulfide grease, fortified to elevated temperatures
of 1000 F. It will handle extreme pressures of up to 500,000 psi.
Trojan Chemicals TRG 290 No Melt Anti-Seize is a specialized lubricant for the lubrication of equipment and machinery in mining operations, mills, factories etc, where a very durable, high , high performance temperature lubricating grease is required. SPECIAL BENEFITS: TRG 290 is fortified with polymers, micronized molybdenum disulfide and metallic powders. It remains highly adhesive to metals. The special additives reduce friction and provide a "plating" action to the lubricating film, even up to 1000 F and pressures up to 500,000 psi. TRG 290 is resistance to high temperatures provide optimum service under extreme conditions that exceed the melting points of most other lubricants. Owing to the blend of special additives, TRG 290 exhibits exceptional resistance to water, steam and wash-out.
|
|
|
|
|
|
|
| An aluminum complexed,
aluminum fortified, NLGI 1, E.P. anti-seize grease. TRG 390 Double "AL"
is designed to provide lubrication up to 1200 F. Trojan's TRG 390 is a
specialized lubricant for high temperature critical environments. TRG 390
is an aluminum complexed, aluminum fortified
grease that exhibits excellent stability under conditions of high hest,
high moisture and high corrosivity.
SPECIAL BENEFITS:
|
|
|
|
|
|
|
| A moly-bentone
based NLGI 2, E.P. grease. This is the workhorse of the extreme temperature
and pressure greases. Handling up to 500,000 psi and temperatures to 800
F, MG 555 is well suited for heavy vehicles, shock loading conditions,
extreme pressure processing lines as well as general bearings etc.
Durakem MG 555 is a specialized lubricating grease formulated for use in machinery and equipment in mining, mills, factories, cold storage units, as well as for the lubrication of all types of fleet vehicles such as commercial trucks, farm vehicles, construction equipment, marina, boats etc.
|
|
|
|
|
|
|
| Ultra low temperature
LT 55, is an NLGI # 1.5, E.P.grease, designed to effective lubricate in
arctic conditions as low as - 55 C. ( -65 F).
It is an extreme pressure grease, fortified with anti-rust, anti-corrosion,
anti-oxidation inhibitors. Durakem LT 55 may be used at temperatures above normal
greases to 270 degrees F, giving it wide latitude in application designations.
It is resistant to water washout, separation and thinning.
Durakem LT 55 is approved by Agriculture Canada for use in registered food processing establishments.
Typical Properties Durakem LT 55
|
|
|
|
|
TRG #90 No Seize